Serving the Brownsville area  ·  (956) 382-6441  ·  Open Mon-Sun 7am-7pm
📞 (956) 382-6441 Free Quote

Metal Roofing in Brownsville, TX (78520) · Local Professionals

Brownsville Metal Roofing · Fast response in Brownsville and the Brownsville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+204Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Brownsville roofs take a beating. Between the subtropical sun, the salt air rolling in from the Gulf, and hurricane season, the shingle and tile roofs on the stucco bungalows and concrete-block ranches around Southmost and central Brownsville are always under pressure. Out in the subdivisions near Olmito and Rancho Viejo, more homeowners are switching to standing seam and stone-coated steel for the same reason: they want a roof that reflects heat and stands up to wind.

We are Brownsville Metal Roofing, and we work these neighborhoods every week. From the historic downtown blocks near Fort Brown to the ranch properties out on the resaca edges, we install, repair, and replace metal roofs built for this climate. If you are in ZIP 78520 and tired of patching the same leak every summer, call us at (956) 382-6441.

Metal Roofing in Brownsville (78520)

Brownsville sits on flat river delta ground, heavy clay soil, and a web of resacas, which means drainage and wind uplift matter as much as the panels themselves. On the historic downtown blocks, we deal with brick and stucco buildings that have flat parapet roofs and decorative cornices, so flashing details and tie-ins need to respect the original structure. In the 1930s to 1950s stucco bungalows and concrete-block ranches across central Brownsville and Southmost, low-pitched roofs often need a retrofit or a full tear-off depending on how many shingle layers are already there. Newer stucco subdivision homes out toward Los Fresnos and Rancho Viejo usually get standing seam or metal shingle because the HOA and the heat both push that direction.

Our crews handle metal roof replacement, standing seam installation, and storm and wind damage repair citywide. We know how salt-laden Gulf air corrodes fasteners and bare steel, so we spec the right fasteners and finishes from the start. We also deal with the occasional hailstorm and the wind-lifted panels that come after a tropical system. If you are near the Brownsville Sports Park or anywhere along Alton Gloor, we have probably worked a roof on your street.

Our services in Brownsville

How a Job Works in Brownsville

Step 1: You call (956) 382-6441 or request a free estimate. We set up an on-site assessment, walk the roof, check the flashing, fasteners, and seams, and talk through what you are seeing. If it is storm damage, we document it for your insurance claim. We never promise coverage, that is up to your carrier, but we give you the photos and notes you need.

Step 2: We schedule the work and handle the permit side. Roofing permits are commonly required for a full replacement or re-roof in Brownsville, and thresholds and inspection requirements vary, so we confirm the rules with the city before we start. If you are in a historic district or an HOA, we coordinate the design review on panel profile and color. Tight lot access in the older neighborhoods and the flat, heavy clay ground both affect staging, so we plan delivery and dumpster placement ahead of time.

Step 3: We clean up every day and do a final walkthrough with you. Magnets run over the yard, gutters checked, and we make sure you know what was done and what to watch for. We leave your property clean.

Pricing in Brownsville depends on square footage, roof pitch and access, how many existing layers you have, and whether it is a repair or a full replacement. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over shingles around $7. Corrugated and ribbed panel roofing starts near $5.50 per square foot, metal shingle and stone-coated steel around $9, and copper or specialty metal around $20. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, flashing and chimney or skylight repair at $600, and coating or painting at $2.50 per square foot. Gutters run about $9 per linear foot. Storm and wind damage inspections are free. Call (956) 382-6441 for a free estimate on your specific roof.

My Southmost bungalow has two layers of old shingles. Can you go over them with metal?
Sometimes, but code limits how many existing layers you can recover over, and low-pitched roofs in that part of town often need a tear-off to fix decking and flashing properly. We check the layers and the deck condition during the free assessment and tell you which route makes sense.
A storm just peeled back panels on my roof near the Brownsville Sports Park. How fast can you get out?
Call (956) 382-6441 and we will schedule a storm and wind damage inspection, which is free. We prioritize active leaks and open roofs, document the damage for your insurance claim, and make temporary repairs before the permanent fix.
What does a typical metal roof replacement cost in Brownsville?
Most full replacements land somewhere between the mid thousands and low five figures depending on size, pitch, access, and whether it is standing seam or a corrugated panel. Replacement starts around $9 per square foot, but the only real number comes from an on-site estimate, which is free at (956) 382-6441.
Do I need a permit for a metal roof in Brownsville, and does the historic district affect it?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds and inspection requirements vary by jurisdiction, so we confirm with the city before work starts. If you are in the historic downtown district, design review can restrict panel profile and color. You can check the City of Brownsville website at https://www.brownsvilletx.gov/ for local rules, and we help you through the process.
My HOA wants a specific panel color, and my neighbor says my new roof will cross the property line. What do I do?
HOA design review is common in the subdivisions out toward Rancho Viejo and Olmito, so we submit the panel profile and color for approval before ordering. On property lines, we keep the work inside your boundary and coordinate with your neighbor if access is needed. If there is a dispute, we document the roofline and defer to your survey.
Is your crew covered by insurance for work on my Brownsville property?
Yes. We are fully insured with general liability and workers' compensation coverage, and we can provide proof before work starts. That protects you if anything goes wrong on the job.
What maintenance does a metal roof need in Brownsville's heat and salt air?
The main thing is fasteners and seams. Salt-laden Gulf air corrodes fasteners over time, so we check and replace screws and re-fasten panels as needed, and we inspect flashing at chimneys and skylights. A coating or painting every few years helps reflect heat. We recommend a free inspection before hurricane season and after any major storm.
Why choose us?

Trusted professionals in Brownsville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Brownsville

All your work handled by qualified professionals in Brownsville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

204+ Verified Client Reviews in Brownsville

⭐⭐⭐⭐⭐ 4.9/5 · 204 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Brownsville · Response within 24h · No commitment · ☎ (956) 382-6441

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Brownsville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm