Serving the Brownsville area  ·  (956) 382-6441  ·  Open Mon-Sun 7am-7pm
📞 (956) 382-6441 Free Quote

Metal Roofing in Rio Hondo, TX (78550) · Local Professionals

Brownsville Metal Roofing · Fast response in Rio Hondo and the Brownsville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+204Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Rio Hondo is a small town where the streets are lined with mesquite and sabal palms, and most homes sit on generous lots with a shop or barn out back. The housing stock runs from older stucco ranches to newer builds with shingle and tile roofs, and the flat delta ground means drainage and wind uplift are always part of the conversation.

Homeowners in Rio Hondo (78550) call Brownsville Metal Roofing because we understand how the Gulf salt air and tropical storms chew up fasteners and panels. Whether you are near the Rio Hondo High School or out on a farm road off FM 106, we bring the same straight talk and metal roofing know-how to every job.

Metal Roofing in Rio Hondo (78550)

Rio Hondo sits on flat, heavy clay soil about 20 miles from the Gulf, so water tends to pool after a hard rain and the salt in the air goes after bare steel and fasteners quickly. Properties here are a mix of older stucco homes with low-pitched shingle roofs and rural places with barns and outbuildings that need tough, low-maintenance roofing. Many lots have citrus or mesquite trees close to the house, which means fallen limbs and leaf debris are a regular concern. The intense sun and humid heat most of the year also push us toward lighter colors and reflective finishes that help keep attic temperatures down.

Our team has worked across Cameron County and knows the difference between a quick patch and a proper repair. We have installed and repaired corrugated and ribbed panel roofs on farm buildings, standing seam on newer homes, and we have re-fastened plenty of roofs after a storm blew through. We serve Rio Hondo and the surrounding Brownsville area, and we are fully insured for your peace of mind.

Our services in Rio Hondo

How a Job Works in Rio Hondo

Step 1: You call us at (956) 382-6441 and we set up a free on-site assessment. We look at the roof, the flashing, the fasteners, and how water drains off your property, then we explain what we see and what options make sense for your budget.

Step 2: Once you approve the estimate, we schedule the work. In Rio Hondo, that often means planning around tight access for a crew truck, moving around outbuildings or citrus trees, and pulling the right permits from the city or county. We handle the paperwork and keep you posted on timing.

Step 3: When the job is done, we clean up thoroughly, haul away old materials, and walk the property with you to make sure you are satisfied. We leave your place as clean as we found it, or better.

Pricing in Rio Hondo depends on the size and pitch of your roof, how many layers are already there, and how easy it is to get materials to the site. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation around $8 per square foot, and standing seam around $10 per square foot. Metal roof repair and leak repair start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. We always give you a free estimate with clear numbers before any work begins, so call (956) 382-6441 to get yours.

My place is off FM 106 near the Rio Hondo High School, and I have a barn with an old corrugated roof. Can you repair it or do I need a full replacement?
We see a lot of barns and outbuildings in that area with corrugated panels that have lost fasteners or rusted through. We will inspect the roof and tell you honestly whether a repair with new screws and washers will hold or if the panels are too far gone. If replacement makes more sense, we can install new corrugated or ribbed panels that handle the heat and wind well.
A storm just blew through and lifted some panels on my roof. How fast can you get out to Rio Hondo?
We prioritize storm damage calls in Rio Hondo and the surrounding area. Call us at (956) 382-6441, and we will schedule a free inspection as soon as possible. We can often make temporary repairs to prevent further water damage while we order materials for a permanent fix.
What does a typical metal roof replacement cost for a 1,500 square foot house in Rio Hondo?
For a house that size, a metal roof replacement might start around $9 per square foot, but the final number depends on the panel type, roof complexity, and whether we need to remove existing shingles. We give free estimates so you get a real number, not a guess. Call (956) 382-6441 to set one up.
Do I need a permit to replace my roof in Rio Hondo, and who handles that?
Permit requirements vary by jurisdiction, and the City of Rio Hondo or Cameron County may require a permit for a full replacement. We always check with the local building department and handle the permitting process for you. Rules can change, so we verify everything before we start.
My neighbor and I share a property line, and I want to make sure my new roof does not cause drainage issues on their side. What should I do?
We can adjust gutter and downspout placement to direct water away from the property line and keep it on your side. If you are in an HOA, we can also help you get approval for the panel profile and color before we order materials. Good communication with neighbors avoids problems later.
Are you insured for roofing work on my Rio Hondo property?
Yes, we are fully insured with general liability and workers' compensation coverage. That protects you and your property while our crew is on site. We are happy to provide proof of insurance before we start.
What kind of maintenance does a metal roof need in Rio Hondo's climate?
Because of the salt air and heavy rains, we recommend an annual inspection to check fasteners, seals, and flashing. After storm season, look for loose or lifted panels and clear debris from valleys and gutters. A simple wash with water and a soft brush helps keep the finish looking good and prevents buildup that can trap moisture.
Why choose us?

Trusted professionals in Brownsville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Brownsville

All your work handled by qualified professionals in Brownsville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

204+ Verified Client Reviews in Brownsville

⭐⭐⭐⭐⭐ 4.9/5 · 204 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Brownsville · Response within 24h · No commitment · ☎ (956) 382-6441

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Brownsville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm