Serving the Brownsville area  ·  (956) 382-6441  ·  Open Mon-Sun 7am-7pm
📞 (956) 382-6441 Free Quote

Metal Roofing in Olmito, TX (78575) · Local Professionals

Brownsville Metal Roofing · Fast response in Olmito and the Brownsville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+204Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Olmito is where the Rio Grande Valley stretches out into acreage, stucco ranches, and metal shops north of Brownsville. If you live off FM 511 or near the Olmito Water Tower, you know the housing mix: 1980s to 2020s stucco homes with concrete tile or shingle roofs, plus a fair number of corrugated metal shops and carports on larger lots. The flat delta ground and heavy clay soil here mean drainage and fastening details matter as much as the panel itself.

Homeowners in Olmito (78575) call Brownsville Metal Roofing because we know how Gulf salt air eats fasteners and how tropical storm winds peel back poorly seamed panels. We are based in Brownsville, just down the road, and we have worked on enough stucco ranches and metal outbuildings around Olmito to spot the local failure patterns before they become leaks.

Metal Roofing in Olmito (78575)

Olmito sits on flat river delta ground with heavy clay soil, which shifts with our wet and dry cycles and puts stress on roof edges and flashing. The lot sizes here are generous, often a half acre or more, so we see a lot of detached shops, carports, and agricultural buildings that need corrugated or ribbed panel roofing rather than a residential shingle profile. Access is usually straightforward, but we still plan for tight spots between a house and a fence line when staging materials. The intense sun and humid heat nearly year-round mean we pay close attention to ventilation and to using fasteners with the right coating for salt-laden Gulf air. After a storm, the calls we get most in Olmito are for wind-lifted panels on outbuildings and active leaks at fastener points on older stucco ranches.

Our team has installed, repaired, and replaced metal roofs across Olmito and the surrounding Cameron County area, from standing seam on newer subdivision homes to retrofit over shingles on 1990s ranches. We know the local building stock and the weather it has to survive.

Our services in Olmito

How a Job Works in Olmito

Step 1: You call us at (956) 382-6441 or request a free estimate. We schedule an on-site assessment at your Olmito property, look at the existing roof, check the flashing and fasteners, and talk through options like a full replacement, a retrofit over your current shingles, or a repair if that is the smarter call. We give you a written scope and price before any work starts.

Step 2: Once you approve, we pull the required roofing permit through the local building department and schedule the work. In Olmito, that often means coordinating with HOA design review for panel profile and color on subdivision homes, or planning around shop and carport access on larger lots. We protect landscaping and keep the site organized while panels go up.

Step 3: We clean up thoroughly, haul away old material, and walk the roof and gutters with you. We do not leave until you have seen the finished work and know what to watch for during hurricane season.

Pricing in Olmito depends on the roof size, access, condition of the existing deck, and how quickly you need it done. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) starts around $7 per square foot, and full metal roof installation starts around $8 per square foot. Standing seam starts around $10 per square foot, and stone-coated steel or metal shingle roofing starts around $9 per square foot. Repairs and leak repairs start around $450, screw replacement and re-fastening starts around $750, and flashing, chimney, or skylight repair starts around $600. Storm and wind damage inspections are free. Call (956) 382-6441 for a free estimate specific to your Olmito property.

My Olmito ranch has a low-pitch shingle roof and I want metal. Is a retrofit over the shingles a good idea here?
Often yes, if your existing shingles are in decent shape and your local code allows the number of layers. A retrofit saves tear-off cost and time, and it works well on the low-pitch stucco ranches common around Olmito. We check the deck and flashing first, because heavy clay soil movement can affect the roof edges, and we will tell you honestly if a full tear-off is the better long-term call.
A storm just lifted panels on my shop roof in Olmito. How fast can you get out?
We prioritize storm and wind damage calls in Olmito and the Brownsville area. Call (956) 382-6441 and we will schedule a free inspection, document the damage for your insurance claim, and make temporary repairs if needed to stop water intrusion. We never promise coverage or suggest a deductible can be waived, but we do provide the documentation your adjuster will ask for.
What does a typical metal roof replacement cost for a 2,000 square foot home in Olmito?
For a home that size, a full metal roof replacement often lands in the range of $9 to $14 per square foot installed, depending on panel type, roof complexity, and whether we tear off the old roof. Standing seam and stone-coated steel sit at the higher end. We give you a firm written estimate after seeing the roof, and we do not add surprise charges.
Do I need a permit for a metal roof in Olmito, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Olmito, and thresholds and inspection requirements vary by jurisdiction. We handle the permit application through the local building department as part of the job, and we confirm the current rules before we start. If your home is in an HOA, we also help coordinate the design review submission.
My neighbor and I share a fence line and I am worried about panel overhang. How do you handle property lines in Olmito?
We respect property lines and set up staging and fall protection so nothing crosses onto your neighbor's lot without permission. If the roof edge or gutter discharge could affect a shared fence line, we point it out before work begins and adjust the layout. For HOA communities, we also confirm approved panel profiles and colors so there are no surprises after installation.
Are you insured for work on my Olmito property?
Yes. Brownsville Metal Roofing is fully insured with general liability and workers' compensation coverage.
What maintenance should I do on my metal roof in Olmito between hurricane seasons?
Check fasteners and seals once a year, especially after a big storm, and rinse off salt and dust buildup. In Olmito, the salt-laden Gulf air corrodes bare steel and cheap fasteners fast, so we recommend coated fasteners and a quick inspection of seams and flashing each spring before storm season. If you see loose screws or lifted panels, call us at (956) 382-6441 before the next blow.
Why choose us?

Trusted professionals in Brownsville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Brownsville

All your work handled by qualified professionals in Brownsville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

204+ Verified Client Reviews in Brownsville

⭐⭐⭐⭐⭐ 4.9/5 · 204 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Brownsville · Response within 24h · No commitment · ☎ (956) 382-6441

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Brownsville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm