Serving the Brownsville area  ·  (956) 382-6441  ·  Open Mon-Sun 7am-7pm
📞 (956) 382-6441 Free Quote

Metal Roofing in Rancho Viejo, TX (78575) · Local Professionals

Brownsville Metal Roofing · Fast response in Rancho Viejo and the Brownsville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+204Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Rancho Viejo is a golf-course community where stucco homes with concrete tile roofs line the fairways, and the summer sun and Gulf humidity never let up. The lots are generous, the streets are quiet, and the resacas wind through the neighborhood, but that pretty setting comes with real roofing challenges.

Homeowners in Rancho Viejo (78575) call Brownsville Metal Roofing because we understand the local housing stock: 1980s to 2020s stucco homes with low-pitch roofs that need to shed heat and stand up to hurricane season. We are based in Brownsville, just a short drive from the Rancho Viejo Golf Club, and we know the area block by block.

Metal Roofing in Rancho Viejo (78575)

Rancho Viejo sits on the flat river delta, and the soil here is heavy clay that holds water after a storm. That means proper drainage around your foundation and roof runoff management are critical. Many homes here have concrete tile roofs that are 20 to 40 years old, and the underlayment is often failing even if the tiles look fine. The intense sun and salt-laden Gulf air corrode fasteners and bare steel, so we always use corrosion-resistant materials. The golf course setting also means mature trees and palms that drop limbs and debris, which can puncture panels or clog gutters. And because Rancho Viejo is a planned community, HOA design review may restrict panel profiles and colors, so we help you navigate that before we order materials.

Our team has worked on homes throughout Rancho Viejo and the surrounding Brownsville area, from standing seam and stone-coated steel to metal shingle and corrugated panel roofs. We know how to match the look of clay tile with stone-coated steel, which is popular here for its hurricane wind rating and heat reflectivity.

Our services in Rancho Viejo

How a Job Works in Rancho Viejo

Step 1: Call us at (956) 382-6441 or request a free estimate online. We schedule an on-site assessment at your Rancho Viejo home, inspect your existing roof, check the attic and flashing details, and talk through your options. You get a written estimate with clear pricing and no pressure.

Step 2: Once you approve, we pull the required roofing permit from the local building department and coordinate with your HOA if needed. On installation day, our crew protects your landscaping and driveway, then removes the old roofing and installs your new metal roof. We work efficiently because we know Rancho Viejo's tight lot lines and golf-course setbacks, and we keep the site secure each evening.

Step 3: After the job, we clean up thoroughly, haul away all debris, and walk the roof with you to show you the finished work. We leave your property clean and provide a final inspection checklist. Your satisfaction is the last step, not an afterthought.

Pricing for metal roofing in Rancho Viejo depends on the size and pitch of your roof, the material you choose, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Stone-coated steel and metal shingle roofs both start at $9 per square foot, and copper or specialty metal starts at $20 per square foot. We always provide a free estimate so you know the exact cost for your home. Call (956) 382-6441 to schedule yours.

My Rancho Viejo home has a concrete tile roof that is 30 years old. Can I switch to stone-coated steel without changing the look?
Yes. Stone-coated steel is a popular choice in Rancho Viejo because it mimics the look of clay tile while being much lighter and more impact-resistant. We can match the profile and color closely, and we handle the transition from tile to steel, including any needed deck repairs and flashing updates.
A storm just blew through Rancho Viejo and lifted some panels on my metal roof. How fast can you respond?
We offer free storm and wind damage inspections. Call us at (956) 382-6441 and we will schedule a visit as soon as possible, usually within a day or two depending on demand. We can tarp or secure the roof temporarily if needed and provide a written repair estimate.
What does a typical metal roof repair cost in Rancho Viejo?
Most repairs start at $450 for leak fixes or minor flashing work. Screw replacement and re-fastening starts at $750. The final cost depends on the extent of damage, roof access, and whether we need to replace panels or just fasteners. We give you a firm price before any work begins.
Do I need a permit to replace my roof in Rancho Viejo, and does the HOA have to approve the color?
Yes, a roofing permit is typically required for a full replacement or re-roof in Rancho Viejo, and the local building department sets the fees and inspection requirements. Your HOA may also have design review rules for panel profile and color. We help you with both: we pull the permit and coordinate with your HOA so there are no surprises.
My neighbor's tree branches hang over my roof in Rancho Viejo. Who is responsible for trimming them?
In Texas, you generally have the right to trim branches that cross your property line, but you cannot damage the tree or trespass to do it. We recommend talking with your neighbor first. If branches are causing roof damage, we can document it for insurance or mediation. We do not handle tree trimming, but we can recommend a local arborist.
Are you fully insured for roofing work in Rancho Viejo?
Yes, we carry general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Rancho Viejo's climate?
Because of the salt air and heavy summer rain, we recommend an annual inspection to check fasteners, seals, and flashing. Cleaning gutters and removing debris from the roof, especially after storms, helps prevent leaks. We offer free estimates for inspections and can set up a maintenance plan.
Why choose us?

Trusted professionals in Brownsville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Brownsville

All your work handled by qualified professionals in Brownsville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

204+ Verified Client Reviews in Brownsville

⭐⭐⭐⭐⭐ 4.9/5 · 204 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Brownsville · Response within 24h · No commitment · ☎ (956) 382-6441

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Brownsville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm