Serving the Brownsville area  ·  (956) 382-6441  ·  Open Mon-Sun 7am-7pm
📞 (956) 382-6441 Free Quote

Metal Roofing in Los Fresnos, TX (78575) · Local Professionals

Brownsville Metal Roofing · Fast response in Los Fresnos and the Brownsville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+204Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Los Fresnos is a fast-growing town where new stucco subdivisions and acreage properties east of the city meet the flat, humid delta of Cameron County. If you live off FM 803 or near the Los Fresnos City Park, you know how tropical downpours and hurricane-season winds test every roof. We are Brownsville Metal Roofing, and we serve Los Fresnos homeowners and property managers with metal roofing that stands up to the Gulf Coast climate.

From the older homes near downtown Los Fresnos to the newer developments along Highway 100, we bring local knowledge of the soil, the wind patterns, and the building codes that matter here. When a storm rolls through and your shingles are gone, or when you are ready to upgrade to a standing seam roof that reflects the heat, call us at (956) 382-6441. We know Los Fresnos because we work here every week.

Metal Roofing in Los Fresnos (78575)

Los Fresnos sits on heavy clay soil that holds water after a rain, and many properties east of town have long driveways and open lots that make access easy for our crew. But the real challenge is the sun and the salt air coming off the Gulf, which is only about 20 miles away. That combination corrodes fasteners and bare steel quickly, so we use corrosion-resistant screws and high-quality coatings on every metal roof we install. The newer stucco subdivisions off FM 1847 and near the Los Fresnos Rodeo grounds often have concrete tile or shingle roofs that are reaching the end of their life, and homeowners there are switching to metal shingle or stone-coated steel to handle the tropical downpours and reflect the heat. We also see a lot of acreage properties with corrugated or ribbed panel roofs on shops and barns, and we repair and replace those panels when they get dented or loose.

Our team has been serving Los Fresnos and the surrounding Brownsville area for years, and we understand the local building department requirements. Whether you need a full replacement on a 1980s ranch house or a retrofit over existing shingles on a newer home, we know how to get it done right and pass inspection.

Our services in Los Fresnos

How a Job Works in Los Fresnos

Step 1: You call us at (956) 382-6441 or fill out our contact form, and we schedule a free on-site assessment. We will walk your roof, check for leaks, loose panels, and flashing issues, and give you a written estimate. If you are in a subdivision with an HOA, we will also review any design guidelines before we recommend a panel profile or color.

Step 2: Once you approve the estimate, we pull the required permits from the City of Los Fresnos or Cameron County, depending on your location. Our crew arrives on time and works efficiently, whether your home is on a tight lot near the Los Fresnos downtown area or on a larger acreage property east of town. We protect your landscaping and keep the work area safe.

Step 3: After the job is complete, we do a full cleanup, haul away all old materials, and walk the property with you to make sure you are satisfied. We leave your yard clean and your new metal roof ready for the next storm season.

Pricing for metal roofing in Los Fresnos depends on the size of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you want to go over existing shingles, a retrofit starts at $7 per square foot. For repairs, most leak fixes start at $450, and screw replacement or re-fastening starts at $750. Metal shingle and stone-coated steel both start at $9 per square foot. We also offer free estimates for commercial and agricultural metal roofing. Call (956) 382-6441 to schedule your free estimate and get a precise number for your Los Fresnos property.

My house is in one of the newer stucco subdivisions off FM 803 in Los Fresnos. Is metal shingle roofing a good fit for that style of home?
Yes, metal shingle roofing is a great choice for those newer stucco homes. It gives you the look of traditional shingles but with the durability and heat reflection of metal. It handles the tropical downpours we get here and holds up to hurricane winds better than asphalt. We install it with corrosion-resistant fasteners to handle the salt air, and we can match colors to your HOA guidelines.
A storm just blew through Los Fresnos and lifted some panels on my roof. How quickly can you respond?
We prioritize storm damage calls in Los Fresnos and the surrounding area. Call us at (956) 382-6441 and we will schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We can tarp any active leaks and provide a written estimate for repairs or replacement. We also document the damage for your insurance claim if needed.
What is the typical cost to replace a shingle roof with a metal roof on a 2,000 square foot home in Los Fresnos?
For a 2,000 square foot home, a basic corrugated or ribbed panel roof might start around $11,000, while a standing seam roof could run closer to $20,000. These are ballpark figures and depend on roof complexity, pitch, and whether we need to remove existing shingles. We give free estimates, so call (956) 382-6441 for a precise quote.
Do I need a permit from the City of Los Fresnos to replace my roof, and how long does it take?
Yes, most full roof replacements require a permit from the City of Los Fresnos or Cameron County if you are outside city limits. The permit process typically takes a few business days to a couple of weeks, depending on the jurisdiction and whether your home is in a historic district. We handle the paperwork and inspections for you, so you do not have to worry about it.
My neighbor and I share a property line, and I am worried about the roof overhang. How do you handle that when installing a metal roof in Los Fresnos?
We always respect property lines and local setback rules. Before we start, we review your survey and any HOA or city requirements for overhangs. If there is any question about the property line, we will discuss it with you and your neighbor to avoid issues. Our goal is a clean installation that keeps everyone happy.
Are you fully insured for roofing work in Los Fresnos, and what does that cover?
Yes, we are fully insured with general liability and workers' compensation coverage. That means if anything goes wrong on your property, you are protected, and our crew is covered on the job. We are happy to provide proof of insurance before we start work.
What maintenance should I do on my metal roof in Los Fresnos to prevent leaks during hurricane season?
Check your roof after major storms for loose or missing screws, and look for any debris that can trap water. We recommend a professional inspection once a year, ideally in late spring before hurricane season. We can tighten fasteners, replace worn seals, and clear gutters. Call us at (956) 382-6441 to schedule a maintenance inspection.
Why choose us?

Trusted professionals in Brownsville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Brownsville

All your work handled by qualified professionals in Brownsville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

204+ Verified Client Reviews in Brownsville

⭐⭐⭐⭐⭐ 4.9/5 · 204 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Brownsville · Response within 24h · No commitment · ☎ (956) 382-6441

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Brownsville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm