Serving the Brownsville area  ·  (956) 382-6441  ·  Open Mon-Sun 7am-7pm
📞 (956) 382-6441 Free Quote

Metal Roofing in Palm Valley, TX (78552) · Local Professionals

Brownsville Metal Roofing · Fast response in Palm Valley and the Brownsville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+204Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Palm Valley is the kind of place where ranch land meets the fairways, and the roofs have to handle both the sun and the storms. Most homes here are stucco ranches and golf-course properties built from the 1980s onward, many with low-pitched shingle or concrete tile roofs that take a beating from the Gulf humidity and hurricane season. With the resacas and flat clay soil never far away, a roof that sheds water right is not optional.

That is why homeowners in Palm Valley (78552) call Brownsville Metal Roofing. We know the difference between a ranch house off Alton Gloor and a patio home near the Palm Valley Golf Club, and we bring the same straight talk and solid work to both. If you are tired of patching shingles after every blow, metal might be the last roof you put on.

Metal Roofing in Palm Valley (78552)

Palm Valley sits on flat ground with heavy clay soil, and that matters more than most folks realize. When it rains hard, water pools instead of running off, so roof drainage and gutter sizing have to be right from the start. The lots here range from tight suburban yards to larger ranch parcels, and access can be tricky on some of the smaller streets off Palm Valley Drive. Add in the salt air from the Gulf and the intense sun, and you get fasteners that corrode and sealants that dry out faster than in other parts of Texas. We see plenty of wind-lifted panels and failed fasteners after tropical storms, plus the occasional hail ding on older shingle roofs. Our team has worked these neighborhoods long enough to know which profiles and materials hold up best, whether it is a metal shingle roof on a golf-course home or a standing seam system on a ranch property.

We have been serving Palm Valley and the surrounding Brownsville area for years, and we understand the local building stock, from the 1980s stucco subdivisions to newer custom homes. When we quote a job, we factor in the soil, the wind exposure, and the way water moves across your lot.

Our services in Palm Valley

How a Job Works in Palm Valley

Step 1: You call us at (956) 382-6441 or reach out online, and we schedule a free on-site assessment. We walk the roof, check the attic if accessible, and look at flashing, fasteners, and drainage. You get a written estimate with options, no pressure.

Step 2: Once you approve, we pull the permits (required for most replacements in Palm Valley, and we verify with the city), order materials, and schedule the crew. On tight lots, we plan staging so we do not block neighbors, and if your home is in an HOA, we help you get the color and profile approved before we start. We protect landscaping and keep the site secure each day.

Step 3: After installation, we clean up thoroughly, haul away old materials, and do a final walkthrough with you. We make sure you know how to care for the new roof and that every detail is right before we leave.

Pricing in Palm Valley depends on the size and pitch of your roof, the material you choose, and how much prep work is needed. For a typical ranch home, metal roof installation starts around $8 per square foot, standing seam runs about $10, metal roof replacement is from $9, and a retrofit over existing shingles starts at $7. Smaller jobs like leak repair start at $450, and screw replacement and re-fastening starts at $750. We also offer metal shingle and stone-coated steel from $9 per square foot, which are popular on golf-course homes. Every roof is different, so we give you a firm quote after a free inspection. Call (956) 382-6441 to get started.

My house is near the Palm Valley Golf Club and has a low-pitch roof. What metal roofing works best for that?
Low-pitch roofs are common in Palm Valley, and standing seam or metal shingle systems are good choices because they handle wind uplift and shed water well. We will check your roof pitch and recommend the right profile, often with a synthetic underlayment designed for the heat and humidity here.
A storm just blew through Palm Valley and lifted some panels on my roof. Can you help quickly?
Yes. We offer storm and wind damage repair with free inspections. Call us at (956) 382-6441, and we will get out as soon as possible to secure the roof, document the damage for your insurance if needed, and make permanent repairs.
What does a metal roof cost for a typical Palm Valley ranch home?
Most ranch homes here fall in the range of $8 to $10 per square foot for installation, depending on the material and complexity. A full replacement might start around $9 per square foot. We provide a detailed estimate after a free on-site assessment, so you know exactly what to expect.
Do I need a permit to replace my roof in Palm Valley?
In most cases, yes. Roofing permits are commonly required for replacements, and requirements vary by jurisdiction. We handle the permitting process and verify the rules with the local building department before we start, so you do not have to worry about it.
My HOA has rules about roof color. Can you help with approval?
We work with HOA design review regularly in Palm Valley. We can provide material samples and color chips for your submission, and we will coordinate with your HOA to make sure the panel profile and color meet the guidelines before we order materials.
Are you fully insured for roofing work in Palm Valley?
Yes, we carry general liability and workers' compensation insurance. We are happy to provide proof of coverage before we start any job, so you have peace of mind knowing your property and our crew are protected.
How often should I have my metal roof inspected in Palm Valley?
We recommend an inspection every two to three years, and after any major storm. The salt air and intense sun can wear on fasteners and sealants, so a quick check can catch small issues before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Brownsville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Brownsville

All your work handled by qualified professionals in Brownsville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

204+ Verified Client Reviews in Brownsville

⭐⭐⭐⭐⭐ 4.9/5 · 204 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Brownsville · Response within 24h · No commitment · ☎ (956) 382-6441

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Brownsville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm