Metal roofing prices in Brownsville vary based on material, roof size, complexity, and whether you need installation, repair, or replacement. Our starting prices give you a clear baseline, and we're here to help you understand the factors that affect your final cost.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Brownsville and Cameron County: panel systems built for relentless sun, salt air and hurricane-season wind, installed over high-temperature synthetic underlayment with proper ventilation and careful flashing details for a 40-60 year service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, the premium choice for Brownsville homes. Panels roll-formed to length and mechanically seamed or snap-locked, with no exposed screws to loosen in daily heat swings or hurricane gusts. Superior wind resistance and a cool reflective finish. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of sun-baked shingle, cracked tile or end-of-life metal roofs: old roofing hauled away, decking inspected and repaired, then a complete new metal system installed. Some carriers may offer discounts for wind-rated or impact-rated roofs, so ask yours. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing asphalt shingles: no tear-off, less waste and a lower-cost path. Popular on Brownsville ranch homes and block houses. We check deck condition first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or storm-hit metal roofing: replacing wind-bent or hail-dented panels, resealing seams and penetrations, and fixing failed flashing before a tropical downpour becomes interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs: leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and parapet transitions) and fixed right, not just caulked over. Emergency tarping available after tropical storms. |
| Screw Replacement & Re-Fastening | From $750 | Brownsville's heat swings and salt-laden air work screws loose and rust washers on older exposed-fastener roofs. Oversized screws and UV-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V), the budget-friendly workhorse for homes, carports, barns and workshops across Cameron County. Quality panels in reflective cool-roof colors, installed with proper screw patterns and closures that keep out wind-driven rain. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that deliver the look of architectural shingles, slate or tile with the lifespan of steel, a favorite for Brownsville homeowners who want metal performance without the standing seam look. Lightweight, walkable and wind-rated for hurricane-season gusts. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish: excellent hail and wind performance, fire-rated options and profiles that mimic the Spanish clay tile common on Brownsville homes. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, porches, bay windows and full architectural roofs: premium metals that develop a living patina, with coastal-grade options for salt air. Custom fabrication for the fine details on historic homes. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of sun-faded, chalking or surface-rusted metal roofs: surface prep, rust treatment and high-performance reflective coating systems that extend roof life 10-15 years, restore color and cut summer heat gain without replacement. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around vents, skylights, valleys, parapet walls and stucco transitions: the number one leak point on Brownsville roofs. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Wind-uplift fastening and edge protection for metal roofs: Brownsville never sees real snow, but hurricane-force gusts peel back eaves, ridges and rakes. Reinforced clips, extra edge fasteners and trim keep the roof on. Honest guidance on what yours needs. |
| Storm & Wind Damage Repair | Free inspection | Repair of hail, wind and tropical-storm damage to metal roofing: thorough documentation with photos, an honest assessment of repair versus replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, coating and salt-air corrosion, and a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles and downspouts that carry sudden tropical cloudbursts away from stucco walls and foundations on low, flat lots. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, workshops, churches, carports and light commercial buildings across Cameron County, from farm buildings among the citrus groves and cotton fields to shops and warehouses near the port, with durable panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and slope : Larger roofs require more materials and labor, and steep slopes can increase installation time and safety requirements.
- Material type and gauge : Standing seam, corrugated panels, stone-coated steel, and copper have different costs per square foot, with thicker gauges and specialty finishes costing more.
- Accessibility and roof complexity : Easy access and simple roof lines reduce labor, while multiple stories, skylights, chimneys, and tight spaces can increase the price.
- Repairs vs. new installation : Minor repairs like leak fixes start at $450, while full installations or replacements involve higher material and labor costs.
What's included
- Travel included across the Brownsville area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, have your roof's approximate square footage, pitch, and material preference ready. Our team will schedule a free inspection and provide a detailed quote that includes materials, labor, and cleanup. Call (956) 382-6441 to get started.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary due to material type (e.g., corrugated panels start at $5.50/sq ft, while copper starts at $20/sq ft), roof size and complexity, labor rates, and whether you need installation, replacement, or repair. Additional features like snow guards or gutters also affect the total.
Do you offer free estimates?
Yes, we provide free estimates for metal roof installation, replacement, and most repairs. Call (956) 382-6441 to schedule your appointment.
What payment methods do you accept?
We accept cash, checks, and major credit cards. Financing options may be available for larger projects; please ask for details when you call.